Nitrogen Heater

Nitrogen pipe heaters are an internationally popular high quality long life electric heating device. It is used to raise, heat and heat the flowing liquid and gaseous medium. When the heating medium is heated by the electric heater under pressure, the fluid thermodynamic principle is used to evenly remove the huge heat generated in the work of the electric heating element, so that the temperature of the heated medium reaches the user's process requirements. According to the actual application environment design, the reasonable power, voltage and size can be configured.

working principle:

Pipeline electric heaters are a type of electrical energy that is converted into heat to heat the material to be heated. During operation, the low-temperature fluid medium enters its input port under the action of pressure through the pipeline, along the specific heat exchange flow path inside the electric heating vessel, and uses the path designed by the fluid thermodynamics principle to take away the high-temperature heat energy generated in the work of the electric heating element. The temperature of the heated medium is raised, and the electric heater outlet is obtained as a high temperature medium required by the process. The electric heater internal control system automatically adjusts the electric heater output power according to the temperature sensor signal of the output port, so that the medium temperature of the output port is uniform; when the heating element is overheated, the independent overheat protection device of the heating element immediately cuts off the heating power source to avoid Overheating of the heated material causes coking, deterioration, and carbonization. In severe cases, the heating element burns out, effectively extending the service life of the electric heater.

Application range

1. Heating of chemical materials in the chemical industry, some powder drying under certain pressure, chemical process and spray drying.

2. Hydrocarbon heating, including petroleum crude oil, heavy oil, fuel oil, heat transfer oil, lubricating oil, paraffin, etc.

3. Process water, superheated steam, molten salt, nitrogen (air) gas, water gas, etc., which are heated by heating.

4, (explosion-proof pipe heater) Due to the use of advanced explosion-proof structure, the equipment can be widely used in chemical, military, oil, natural gas, offshore platforms, ships, mining areas and other explosion-proof places.