The China's Leading 

Heating Element Manufacturer

What should I do if the single-head electric heating tube of the mold cannot be installed?

Home    更新    What should I do if the single-head electric heating tube of the mold cannot be installed?

The mold single-head electric heating tube is usually customized according to the non-standard diameter of the mold hole, but some customers found that the mold single-head electric heating tube could not be installed after receiving the pipeline. Why?

The reasons are as follows:

1. If the mold hole has been used for a long time, there may be some small residues left by the burning of the heating tube, which will be tightly nailed into the mold hole, causing the heating tube to fail to install.

2. The heating tube may be too long. When the normal heating tube exceeds 500 mm, the bending of the banana or the bending caused by the extrusion during transportation will cause the single-head electric heating tube of the mold to fail to install.

What if the mold single-head electric heating tube cannot be installed? You can clean up the residue in the mold hole first. If it still cannot be installed, the single-head electric heating tube of the mold needs to be sent back to the original factory to reduce the diameter of the tube, and then be calibrated.

In this way, the mold single-head electric heating tube can be installed in the mold hole.

2021年10月29日 11:29
浏览量:0
收藏